PSR-500/600 How to use the Spectrum Sweeper Feature

Home | News | Products | 09 Sep 2010

Support Center » Knowledgebase » PSR-500/600 How to use the Spectrum Sweeper Feature

	PSR-500/600 How to use the Spectrum Sweeper Feature

Solution 1. PRESS PGM

2. PRESS NEW (THE F1 SOFT KEY)

3. PRESS SRCH (THE F3 SOFT KEY)

4. PRESS SWPR (THE F3 SOFT KEY)

5. USING THE LEFT AND RIGHT SCROLL ARROWS,
    ASSIGN THIS PARTICULAR SPECTRUM SWEEPER
    OBJECT TO ONE OF THE 20 SCAN LISTS - IF AN
    ASTERISK APPEARS TO THE LEFT OF THE SCAN
    LIST NUMBER, GO TO THE NEXT STEP - IF NOT,
    THEN ADD AN ASTERISK BY PRESS THE SEL KEY

6. SCROLL DOWN ONE CLICK TO TYPE:

7. DECIDE BETWEEN ALL BANDS AND PUBLIC
    SAFETY, USING THE LEFT RIGHT SCROLL ARROW

8. SCROLL DOWN ONE CLICK TO SUB-BANDS

9. THERE ARE 9 SUB-BANDS(NUMBERED 0 - 8)
      UNDER THE ALL BAND OPTION, & 5 SUB-BANDS
      (0 - 4) UNDER THE PUBLIC SAFETY OPTION

10. USING THE LEFT & RIGHT SCROLL ARROWS,
      GO TO EACH OF THE SUB-BANDS AND MAKE
      SURE THAT THE ONES YOU WANT TO SCAN
      HAVE AN ASTERISK NEXT TO THE SUB-BAND #
      AND THE ONES YOU DONT, HAVE NO ASTERISK

11. SCROLL DOWN ONE CLICK TO THE TAG LINE

12. IF YOU WANT TO GIVE THAT PARTICULAR
      SPECTRUM SWEEPER OBJECT A NAME, PRESS
      THE SEL KEY - THEN USING THE STANDARD
      METHOD FOR ENTERING ALPHANUMERIC DATA
      TYPE OUT THE NAME

13. PRESS DONE (F1 SOFT KEY)

13. PRESS SAVE (F1 SOFT KEY)

14. TO ACTIVATE THE SPECTRUM SWEEPER, PRESS FUNC THEN SCAN

15. BY PRESSING THE BAND KEY (F1 SOFT KEY), YOU CAN ALTERNATE
       BETWEEN ALL BAND AND PUBLIC SAFETY

16. YOU CAN ALSO LOCK OUT SUB-BANDS BY PRESSING THE NUMBER OF
       THE SUB-BAND YOU WANT TO LOCKOUT WHILE

::By Glenn from Scanner Unlimited::

Article Details

Article ID:

Created On:

16 Nov 2007 01:25 AM