Bulletin Release - 11/20/2007 - 

GRE - A final release of PSR-500 "CPU F1.1" and "DSP U1.1" Firmware has been released.

CPU Production Firmware - F1.1 Release Note Fixes.
  
-Identical to beta U0.2, plus:

-Fixed: WX mode would occasionally / unintended increment to the next freq.


DSP Production Firmware - U1.1 Release Note Fixes.

- This is the loadable version of the Factory 1.1 DSP firmware. Will display as "U1.1" after loading and is identical to the factory "F1.1" load.

This is identical to the beta version "U0.3" which provides improvement
in Project-25 decoding on most systems over the factory "F1.0" firmware.

Please download the F1.1 Release Firmware at: http://www.greamerica.com/support 

- The GRE Development Team -

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

Bulletin Release - 11/09/2007 - 

GRE - A beta release of PSR-500 "CPU U02" and "DSP U03" Firmware has been released. Please be advised this are still Beta Releases. We would like to get as much feedback as possible to help us find any known issues before an official Firmware update is released. Your feedback and support would greatly be appreciated.

"CPU500_U02" (Beta) Release Note Fixes.
  
-Fixed: FUNC key problem in V-Scanner mode (sometimes gave an error beep)

-Fixed: Disappearing "FrLO" softkey in TUNE mode

-Fixed: Cancel WX alerts when any WX mode "exit" key (including WX) key is pressed

-Fixed: SAME event/area matching when 000000 area codes are received

-Fixed: Allowed values in GLOB 'Dflt ScanList' item to match the [correct] help text

-Fixed: Default scan list' GLOB item to allow "0" (no scan list)

-Improved: While on a CONV object in MAN, pressing MAN again now resets the tuned object to allow a new mode detect (DG/FM, SQ:Search, etc.)

-Improved: While the "ShowCCInfo" GLOB setting is enabled: Removed control channel (CC) index/quality display from TGRP/MAN display. Within P25/M36 modes, while showing TGRP and the voice channel (VC), show the CC index-slot and CC freq (blinking/alternating) with the VC frequency. This is an aid to understanding which CC the radio used to trunk to the VC. This is especially useful within multi-site areas


"DSP500_U03" (Beta) Release Note Fixes.

- Slight improvement over U0.2, especially on very weak signals.

Please download the Beta Release Firmware at: http://www.greamerica.com/support 

- The GRE Development Team -

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

Bulletin Release - 11/06/2007 - 

GRE - A beta release of PSR-500 "DSP U02" Firmware has been released due to bug found in U01. Please be advised this is still a Beta Release only. We would like to get as much feedback as possible to help us find any known issues before an official Firmware update is released. Your feedback and support would greatly be appreciated.


"DSP500_U02" (Beta) Release Note Fixes.

- Fix V-Folder numbering error on U0.1, otherwise identical to U0.1

Please download the Beta Release Firmware at: http://www.greamerica.com/support 

- The GRE Development Team -

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

Bulletin Release - 11/05/2007 - 

GRE - A beta release of PSR-500 CPU and DSP Firmware has been released. Please be advised that this is a Beta Release only. We would like to get as much feedback as possible to help us find any known issues before an official Firmware update is released. Your feedback and support would greatly be appreciated.

"CPU500_U01" (Beta) Release Note Fixes.
  
 -Fixed: EDACS will no longer trunk to encrypted (Pro-Voice) calls
 
 -Fixed: Properly display SiteID for M36 in trunking analysis mode (SiteID was
  previously one too low in number)

 -Fixed: Pressing ATT at power-up, changing the setting, then saving will now
  preserve the new value

 -Fixed: P25 dwell timeout when not holding/paused

 -Fixed: Mot3600 CC dwell timeout when receiving RF SQ but no CC messages

 -Fixed: RF Squelch timers on CCs. Should fix cases where CC could not be
  found

 -Fixed: Monitoring of DG signals in Tune mode (would pulse the audio every
  few seconds)

 -Improved: Unmuting on start of DG calls

 -Improved: Less falsing of Mot subaudible detect in Tune mode

 -Fixed: When paused while scanning, better handle changing CCs

 -Improved: PC/IF remote control presents the radio's speaker mute state
  within more real time

"DSP500_U01" (Beta) Release Note Fixes.

- Improve P25 DG decoding on all system types

Please download the Beta Release Firmware at: http://www.greamerica.com/support 

- The GRE Development Team -

-------------------------------------------------------------------------------------------------------------------------------------------------------------------

 more news