GINA 6000N-5 is a stand alone, high frequency data transceiver that uses spread spectrum technology. GINA 6000N-5 uses a standard RS-232 serial data interface that can be driven asynchronously at rates of up to 38.4 kbps. GINA 6000N-5 receives and transmits data in the frequency range of 902 to 928 MHz at air speeds of up to 128 kbps. GINA 6000N-5 can perform point-to-point or point-to-multipoint communication.
GINA 6000N-5 contains a packet controller module with a custom communication protocol that provides communications handshaking, error detection, packet sequencing, flow control, and supports up to 3 repeaters to extend the communication range. GINA 6000N-5 implements a subset of standard packet framing with a built in Cyclic Redundancy Check (CRC). As the GINA 6000N-5 performs a CRC , if data is corrupted GINA 6000N-5 will discard that data. To assure accurate data transmission, your system (peripheral) is responsible to verify if any data blocks are missing.
 
6000N-5 Radio Modem Specifications
 Adjacent Channel Rejection  -40 dB = 4 Mhz 
 Baud Rate Asynchronous  .3 to 38.4 Kbps Duplex TDD - RS232 (DB9F)
 Channels  21 Programmable
 Control  CTS, RTS
 Data Format  7 and 8 bits, (none, even, odd) parity, 1 or 2 stop
 Dimensions  1.52"H x 4.17"W x 5.0"D
 (38.6 mm) x (105.9 mm) x (127 mm)
 Dynamic Range  -100 dBm ~ -30 dBm
 Frequency Range  902 to 928 MHz
 Indicators  PWR, TxD, RxD
 Modulation  Bi-Phase Shift Keying (BPSK)
 PN  7 Stage (127 Chip)
 PN Rate  2 Mhz
 Operating Mode  Point-to-Multipoint or Point-to-Point
 Operating Temperature  -20 to +60 Degrees C (Optional -34 to +74)
 PN Codes  4 PN Codes Sequence Varies within ea. channel
 Power Consumption  10 Watt Maximum
 Power Requirements  10.5 to 13.8 VDC
 Radio Technique  Spread Spectrum Direct Sequence
 Range Nominal  800 feet
 Indoor  500 to 1500 feet
 Outdoor  12+ Miles - Direct Line-of-Site FCC compliant
 Relative Humidity  0-90% Non-Condensing
 System Gain  120 dB
 Transmission Delay  30 mSec
 Voice Option Interface  RJ22 w/Handset for 6000NV-5 Models only
 Weight  16 oz.
 TRANSMITTER  PERFORMANCE
 Carrier Frequency Stability  15 KHz
 Power Consumption  750 mA @ 12 VDC
 Spurious Output  FCC Part 15, meets 15.245 & 15.247
 Output Power  725 mW (28.6 dBm)
 RECEIVER  PERFORMANCE
 BER  10-6 @ -92 dBm
 Local Oscillator Stability  15 KHz
 Receiver Threshold  -100 dBm
 Rec./Stand-by Power Consumption  400 mA @ 12 VDC
 Signal Acquisition Time  8 mSec
 Spurious Rejection  -50 dBm
 CONTROLLER  PERFORMANCE
 Buffer  20 K bytes
 Collision  CSMA
 CPU  80C188
 Error Control  CRC
 Flow Control  CTS / RTS
 Packet Size  5 to 1024 Bytes
 Packetizing Time  18 mS / 1 Byte, 96 mS / 1024 Bytes @ 9600 bps
 Repeater  Selectable up to 3 Stations (with R3 firmware)
   
 *Specifications subject to change without notice.
     [Download Data Sheet]          [Download User Manual]

Copyright © 2007 GRE America, Inc. All Rights Reserved

Home        Products        Support        OEM        Contacts