GINA 6000N is a stand alone, high frequency data transceiver that uses spread spectrum technology. GINA 6000N uses a standard RS-232 serial data interface that can be driven asynchronously at rates of up to 38.4 kbps. GINA 6000N receives and transmits data in the frequency range of 902 to 928 MHz at air speeds of up to 128 kbps. Communicating at this air speed allows GINA 6000N to be a duplex link. GINA 6000N can be configured to be used as a point-to-point or point-to-multipoint communication device. 
GINA 6000N contains a packet controller module with a custom communication protocol that provides communications handshaking, error detection, retry, packet sequencing, flow control, and repeaters to extend the communication range. GINA 6000N implements a subset of standard packet framing with a built in Cyclic Redundancy Check (CRC) and High Level Data Link Control (HDLC). The protocol used is a modified X.25 protocol. GINA 6000N will automatically resend all information until it is completely received with no errors in the point-to-point mode. The point-to-point mode assures extremely accurate data transmission.
 
GINA 6000N Radio Modem Specifications
 Adjacent Channel Rejection  -40 dB = 4 MHz
 Baud Rate Asynchronous  1.2 to 38.4 Kbps Duplex TDD -RS232 (DB9F)
 Channels  21 Programmable
 Control  CTS, RTS
 Data Format  7&8 bits, (none, even and odd) parity, 1 or 2 stop
 Dimensions  1.52"H x 4.17"W x 5.0"D
 (38.6 mm) x (105.9 mm) x (127 mm)
 Dynamic Range  -100 dBm ~ -30 dBm
 Frequency Range  902 to 928 MHz
 Indicators  PWR, TxD, RxD
 Modulation  Bi-Phase Shift Keying (BPSK)
 PN  7 Stage (127 Chip)
 PN Rate  2 MHz
 Operating Mode  Point-to-Point
 Operating Temperature  -20 to +60 Degrees C (Optional -34 to + 74)
 PN Codes  4 PN Codes Sequence Varies within ea. channel
 Power Consumption  10 Watt Maximum
 Power Requirements  10.5 to 13.8 VDC
 Radio Technique  Spread Spectrum Direct Sequence
 Range Nominal  800 feet
 Indoor  500 to 1500 feet
 Outdoor  12 + Miles - Direct Line-of-Site FCC compliant
 Relative Humidity  0-90% Non-Condensing
 System Gain  120 dB
 Transmission Delay  30 mSec
 Voice Option Interface  RJ22 w/handset for 6000NV Models only
 Weight  16 oz.
 TRANSMITTER  PERFORMANCE
 Carrier Frequency Stability  15 Khz
 Power Consumption  750 mA @ 12 VDC
 Spurious Output  FCC Part 15, meets 15.245 & 15.247
 Output Power  725 mW (28.6dBm)
 RECEIVER  PERFORMANCE
 BER  10-6 @ -92 dBm
 Local Oscillator Stability  15 Khz
 Receiver Threshold  -100 dBm
 Rec./Stand-by Power Consumption  400 mA @ 12VDC
 Signal Acquisition Time  8 mSec
 Spurious Rejection  -50 dBm
 CONTROLLER  PERFORMANCE
 Buffer  20 K Bytes
 Collision  CSMA/CDMA
 CPU  80C188
 Error Control  HDLC
 Flow Control  X ON / X OFF and / or CTS / RTS
 Packet Size  5 to 1024 Bytes
 Packetizing time  18 ms / 1 byte, 96 ms / 1024 Bytes @ 9600 bps
 Repeater.  Selectable
   
 *Specifications subject to change without notice.
     [Download Data Sheet]          [Download User Manual]

 

Copyright © 2007 GRE America, Inc. All Rights Reserved

Home        Products        Support        OEM        Contacts