GINA 5000N receives and transmits data in the ISM band of 902 to 928 MHz in half-duplex mode. GINA 5000N uses a standard RS-232 serial data interface that can be driven asynchronously at rates from 1.2 through 19.2 kbps (options 38.4 kbps). GINA 5000N does not require any synchronization between it and the DTE device. It automatically synchronizes on any speed up to 19.2 kbps without any setting (options 38.4 kbps ).
GINA 5000N will transmit at the same speed as your asynchronous RS-232 device. GINA 5000N is designed to replace an RS-232 cable connected to a distant device. It is a plug and play transparent link to any device with a RS-232 serial interface. There are no special setups required. GINA 5000N is a highly secure spread spectrum radio, and adds no protocol. It does not packetize nor perform error correction, which allows it to be completely transparent. GINA 5000N being completely transparent allows any custom communication protocol to be used.

5000N Radio Modem Specifications
 Adjacent Channel Rejection  -40 dB = 4 MHz
 Baud Rate Asynchronous  1.2 to 19.2 Kbps Half Duplex-RS232 (DB9F) (Optional 38.4 Kbps)
 Channels  21 Selectable by dip switch
 Control  CTS
 Data Format  Transparent, Any Data Format
 Dimensions  1.52"H x 4.17"W x 5.0"D
 (38.6 mm) x (105.9 mm) x (127 mm)
 Dynamic Range  -100 dBm ~ -30 dBm
 Frequency Range  902 to 928 MHz
 Indicators  PWR, TxD, RxD
 Modulation  Bi-Phase Shift Keying (BPSK)
 PN  7 Stage (127 Chip)
 PN Rate  2 MHz
 Operating Mode  Point-to-Multipoint
 Operating Temperature  -20 to +60 Degrees C (Optional -34 to +74)
 PN Codes  4 PN Codes Sequence Varies within ea. channel
 Power Consumption  10 Watt Maximum
 Power Requirements  10.5 to 13.8 VDC
 Radio Technique  Spread Spectrum Direct Sequence
 Range Nominal  800 feet
 Indoor  500 to 1500 feet
 Outdoor  12 + Miles - Direct Line-of-Site FCC compliant
 Relative Humidity  0-90% Non-Condensing
 System Gain  120 dB
 Transmission Delay  20 mSec
 Voice Option Interface  RJ22 w/handset for 5000NV Models only
 Weight  16 oz.
 TRANSMITTER  PERFORMANCE
 Carrier Frequency Stability  15 Khz
 Power Consumption  700 mA @ 12 VDC
 Spurious Output  FCC Part 15, meets 15.245 & 15.247
 Output Power  725 mW (28.6 dBm)
 RECEIVER  PERFORMANCE
 BER  10-6 @ -92 dBm
 Local Oscillator Stability  15 Khz
 Receiver Threshold  -100 dBm
 Rec./Stand-by Power  Consumption  325 mA @ 12 VDC
 Signal Acquisition Time  8 mSec
 Spurious Rejection  -50 dBm
   
 *Specifications subject to change without notice.
   [Download Data Sheet]          [Download Manual]

 

Copyright © 2008 GRE America, Inc. All Rights Reserved

Home        Products        Support        OEM        Contacts